We operate six bulk grain export terminals strategically located along South Australia’s coastline, providing efficient access to global markets for export customers.
Our ports support a range of vessel sizes, enabling customers to optimise shipping pathways and manage export volumes effectively.
For shipping enquiries, please contact [email protected]
Shipping reports
Available capacity
Long term capacity and other
Shipper documents
Vessel booking forms
The port of Thevenard is 793 kilometres west of Adelaide and 3 kilometres from the centre of Ceduna.
| Ship loader type |
1 travelling gantry with retractable boom and spout attached No trimming heads available Spout trimming only |
| Number of belts | 1 |
| Number of spouts | 1 |
| Air draft | 14m |
| Indicative loading rate | 1000 tonnes/hour |
Port Lincoln is situated at the southern tip of Eyre Peninsula, 682 km from Adelaide by road and 280km west by air. A natural deep water harbour makes Port Lincoln attractive to large bulk grain carriers for topping up loads from shallow ports in South Australia and Victoria.
| Ship loader type |
2 travelling gantry loaders Spout trimming only |
| Number of belts | 2 |
| Number of spouts | 2 |
| Air draft | 22.3m |
| Indicative loading rate | 3000 tonnes/hour |
The port of Wallaroo is situated on the eastern side of Spencer Gulf, 160km by road and 197 nautical miles from Adelaide.
| Ship loader type |
5 identical slewing loading booms with spouts attached (operate 2 at a time) Spout trimming only |
| Number of belts | 1 |
| Number of spouts | 5 |
| Air draft | 12.9m |
| Indicative loading rate | 800 tonnes/hour |
Port Giles features a deep-water berth, situated on the eastern side of Yorke Peninsula, 217km by road and 35 nautical miles from Adelaide.
| Ship loader type |
5 identical slewing loading booms with spouts attached No trimming heads available Spout trimming only |
| Number of belts | 1 |
| Number of spouts | 5 |
| Air draft | 15.5m |
| Indicative loading rate | 1000 tonnes/hour |
Situated near the mouth of the Port River, Outer Harbor is 11km downstream of the Inner Harbour grain berth. Outer Harbor was custom-built on the deep-water berth to allow larger vessels to load.
| Ship loader type |
Cleveland cascade chute travelling loader Trimming head attached to loader when hold trimming |
| Number of belts | 1 |
| Number of spouts | 1 |
| Air draft | 24.4m |
| Indicative loading rate | 2200 tonnes/hour |
Inner Harbour grain berth is situated on the Port River, 11km upstream of Outer Harbor.
| Ship loader type |
1 travelling gantry loader Spout trimming only |
| Number of belts | 1 |
| Number of spouts | 1 |
| Air draft | 14.7m |
| Indicative loading rate | 800 tonnes/hour |
Navigational restrictions may apply to some larger vessels. See Inner Harbour’s berth details and restrictions.
